How to Make Cloth Wipes

How to Make Cloth Wipes

This photo tutorial shows how to make cloth wipes for your baby using either a sewing machine or serger.  Save money, eliminate chemicals, and reduce waste with this quick and easy project.

how to make cloth wipes tutorial

This tutorial gives you step-by-step instructions to make cloth wipes
that are just the right size to fit in a regular wipes container or
wipes warmer.  A couple hours of sewing could save you a few hundred
dollars in wipes over the course of your baby’s time in diapers, so if you know how to sew, you can save yourself a lot of money!

Why Cloth Wipes?

If you already use cloth diapers, cloth wipes can be a logical next step!  Not only can they be reused, saving you money (and helping the environment!), they can also be washed with your cloth diapers (no more sorting!)  Plus, cloth wipes actually clean your baby up better, and they don’t contain any chemicals (like many of the disposable wipes).

So, if you’re looking for a simple cloth diaper accessory sewing project, read on.

Materials Needed to Make Cloth Wipes:

 You will need:

  • 2 layers of fabric, cut 8×8 inches (or 9×9 if you plan to serge to allow you a 1/2″ trim allowance)
  • Coordinating or contrasting polyester thread
  • Optional: rotary cutter, mat and straight edge – this makes for quick and easy squaring fabric up, but if you don’t have one, scissors work just fine!

sherpa cloth wipe cut

Fabric Choices

Cloth wipes can be made from just about any fabric, including used towels!  It’s best to pick at least one layer of one absorbent natural fabric (cotton, bamboo, hemp) that will hold water, but microfleece or minky can make a great second layer for a softly textured wipe!

  • Cotton herpa (I bought mine from Wazoodle)
  • Cotton or Hemp fleece
  • Flannel
  • Velour
  • Terry
  • Jersey knit (for example: 2 layers of t-shirt)
  • Microfleece or minky

For the wipes below, I used a flannel/sherpa combination and a flannel/microfleece combination.

Tip: Pre-wash any dark colored fabrics on hot with your regular cloth diaper detergent.  Add a scrap of white fabric so you can test to make sure that the fabric doesn’t run!  The last thing you’ll want is for your homemade wipes to transfer dye to your wonderfully white cloth diapers!

Okay, let’s get started!

Instructions to Make Cloth Wipes with a Sewing Machine

If you’ve bought cloth wipes – or looked at them in a cloth diaper
store – they’ve no doubt had professionally serged edges.  But don’t
fear if you don’t have a serger – you can still make cloth wipes using
your sewing machine!  They might not look as beautiful, but they will
function just as well as their serged counterparts!

Here we’ll show you how to make cloth wipes by finishing the edges using a zig-zag stitch on your sewing machine.

First, trim the corners on your fabric squares so they are rounded, as shown below.

sewing cloth wipes cutting

Next, be sure to change the settings on your sewing machine.  I use the widest stitch width (6 on my machine), and a 1 for stitch length.  You can experiment on a scrap to see what you like the look of before you get started with your actual wipes.

Next, lay your fabric under the presser foot, and zig-zag, allowing the outside of the stitch to fall slightly off the edge.  This will keep woven fabrics from unraveling later on.

zigzagging cloth wipes

Here’s the finished wipe.  This one is a combination of soft brushed flannel and microfleece.  I bought both pieces of fabric from the “ends” bin at my fabric store.

zigzagging cloth wipes finished

Instructions to Make Cloth Wipes with a Serger

Start at one corner, and place your fabric under the serger presser foot.  Serge along the first edge.

serging cloth wipes

The corners are a bit tricky.  You can stitch straight through and remove the wipe and start again down the next side for square corners, or you can round them with the serger.  It takes a bit of practice to get a perfectly rounded corner, but wipes are a great place to practice!  Push your fabric into the knife to trim, as shown below.

serging corners cloth wipes

Continue serging around the wipe until you reach your starting point.  Serge off, and then trim any excess thread back.

cloth wipe finished serged

All finished!

Ready to Use Your Cloth Wipes?

You can place your cloth wipes in a commercial wipes box or wipes warmer.  Place them in a small wet bag to take them with you when you go places, too!

tutorial cloth wipes